Zinc Alloy

Basic Properties

Zinc alloy (ZA series, Zamak 3 / ZA-3 and ZA-5, ZA-8, ZA-12, ZA-27) is a low-cost, high-precision die-casting and machining alloy with excellent dimensional stability.

  • Low melting point (about 385 °C) and excellent castability: thin walls, fine detail and sharp edges are easy to reproduce.
  • Very good machinability: free-cutting chips, high surface quality straight from the tool, low tool wear.
  • Good strength and dimensional stability: ZA-3 holds tolerances well and takes plating and painting without distortion.
  • Natural corrosion resistance: a protective oxide / chromate layer forms, further improved by plating or coating.
  • High density (about 6.6 g/cm³): gives a solid feel to hardware, locks and decorative parts.
  • Drawbacks: creep strength drops above about 100 °C; intergranular corrosion can occur in steam or humid service if impurity levels (Pb, Sn, Cd) are not controlled.

Common Surface Finishes for Zinc Alloy

  1. Chromate conversion coating: clear, blue or yellow passivation for indoor corrosion protection.
  2. Zinc-nickel or copper-nickel-chrome plating: bright decorative and wear-resistant surfaces.
  3. Powder coating and e-coating: durable colour finishes for architectural and automotive parts.
  4. Vibratory polishing and tumbling: removes parting lines and burrs before plating.
  5. Laser marking and engraving: permanent logos and part numbers on hardware.

Main Applications

  • Hardware and builders’ fittings: locks, hinges, handles, door and window furniture.
  • Plumbing and valves: bodies, cartridges, fittings and irrigation components.
  • Electrical: conduit fittings, connectors, junction boxes and terminal blocks.
  • Automotive: brackets, trim, instrument parts and small structural castings.
  • Fasteners, gears, decorative and instrument components where cost and precision both matter.

Material parameters

ParameterValue
Price$
Delivery time7 days
Wall thickness0.8 mm
Tolerance±0.005 inch (±0.125 mm)
Maximum part size200 x 80 x 100 cm
Available Zinc Alloy GradesZA-3 / Zamak 3, ZA-5, ZA-8, ZA-12, ZA-27

Frequently Asked Questions

To shorten the lead time for CNC workpieces, we start with the documentation you provide. Please submit complete, clear 2D drawings and 3D models, including dimensional tolerances, surface finish requirements and machining specifications. Please also specify any special materials, surface treatments and assembly requirements. Avoid incomplete drawings, ambiguous annotations and inconsistent document versions.

 

Complete documentation allows us to proceed directly with programming, production planning and scheduling, reducing the need for repeated clarification and additional information. We also recommend finalising order quantities, delivery schedules and special requirements in advance. Addressing these details early helps minimise unnecessary communication and the risk of rework, shortening the overall lead time.

With 12 years of experience in CNC machining, Kong Fai stands out from other manufacturers and intermediaries. Our factory covers 4,000 [unit to confirm] and is equipped with over 100 production machines. We achieve machining accuracy of up to 0.001 mm, enabling us to produce high-precision components.

 

Supported by standardised production management, we maintain an on-time delivery rate of 98%. As a direct manufacturer with fully in-house production capabilities, we control every stage of production without outsourcing. We deliver consistent quality, exceptional precision and reliable lead times, making us a trusted partner for precision CNC machining.

Fast delivery is one of our key strengths. For 3D printing orders, we offer delivery within three days, ideal for rapid prototyping and urgent sample requests. For standard CNC machining projects, the typical lead time is around three weeks.

 

We manage the entire process in-house, from drawing review and process planning to production, quality inspection and dispatch, without intermediaries. With comprehensive facilities and an experienced team, we reliably fulfil both urgent sample orders and mass-production requirements. We maintain consistent quality and dependable lead times to keep your projects on track.

We offer a wide range of surface treatments and colour options, including anodising, powder coating, spray painting, electroplating, brushing, sandblasting and polishing.

 

Anodising offers various colours and strong corrosion resistance for aluminium parts. Powder coating and spray painting provide durable coatings in an extensive range of colours, while electroplating enhances lustre and corrosion resistance. Brushing creates fine linear textures, sandblasting produces a matt finish, and polishing achieves a smooth, bright surface.

 

Colours and finishes can be customised to suit your application requirements.

Yes, we provide material certificates and relevant test reports for our CNC-machined parts. All raw materials are sourced from qualified suppliers and supported by appropriate documentation.

 

Material certificates, dimensional inspection reports and quality test records are available on request. Every product undergoes rigorous inspection before dispatch. These documents help demonstrate material compliance and product quality, supporting your quality audits and project requirements.

We apply strict quality control measures to prevent non-conforming products. Every workpiece undergoes dimensional and visual inspection during and after production to check compliance with the design drawings and specifications.

 

If any items do not meet the agreed specifications, we will take immediate responsibility. We will promptly review the issues with you and arrange rework or remanufacture as required, at no additional cost. We will cover all related costs.

 

We will also analyse the root cause and improve our processes to prevent similar issues from recurring. Our goal is to consistently deliver conforming products and keep your project on track.

滚动至顶部